R134a Oil / Dye 2 oz Injector #5055

Tools

$23.65 Quantity:

Envirosafe R134a Oil / Dye 2 oz Injector #5055 Photo - Click to Enlarge

Inline Dye Injector can be used with manifold gauge set or any evacuation or recharging equipment.  Has a 2 oz. capacity and 1/4" Fl shut-off adapter.
 

Directions:

  1. This injector may be used to add most A/C additive to our system from oil, dye, stop leak, etc.  
  2. Before adding any additive to the injector, the shut off valve must be off.  Uscrew the end off the injector.
  3. Put in the desired amount of additive.
  4. Screw the end back on the injector.
  5. Connect R134 coupler to the injector.
  6. Connect other end of the injector to the low side service port on the vehicle.
  7. Open the valve on the injector.
  8. With refrigerant attached, fill to proper pressure.
  9. When finished using the injector tool, clean well by using brake cleaner.

Note:  A/C must be running with the compressor on before injecting additive or refrigerant.

Newsletter Signup: